How do I scan and send using a Follow-Me Printer (UniFLOW)?

Log into the Printer

1. Log into the printer using one of the options below

Bucknell ID

  1. Tap your Bucknell ID on the ID scanner on the printer. For first-time users, tap your ID on the printer and enter your proxy card number when prompted. The proxy card number is the 5 digits after the "+" on the back of your BUID. If you see the copy, secure print and scan options, your ID card has been successfully recognized. 

Proxy ID Number

  1. Select Pin Number on the printer screen
  2. Enter the proxy number (5 digits after the +) on the back of your card. 

Scanning using the Follow-Me printers

  1. Once you are logged into the printer, click on Scan. 
  2. You will have two options to select for scanning:

Scan to Myself

  1. Select Scan to Myself 
  2. Put your document into the feeder
  3. Select Start
  4. A preview of the document will appear on the screen
  5. Select Next
  6. Your scanned job will appear in your email shortly

Scan to Google Drive

  1. Select Scan to Google Drive
    • Note: If you do not have the Google Drive option you must set it up - Setup instructions
  2. Put your document into the feeder
  3. Select Start
  4. A preview of the document will appear on the screen
  5. Select Next
  6. Your scanned job will appear in your Google Drive shortly

How to I set up to scan to Google Drive?

  1. Go to webprint.bucknell.edu
  2. In your dashboard, go to Notifications
  3. Select Connect under Connect to Google Drive
  4. Authorize the connection to your Google Drive
  5. Sign into your Bmail account or select your Bmail account if it's listed. 
  6. Select Continue to give uniFLOW access to Google Drive
  7. If you have given uniFLOW access to Google Drive you receive a confirmation window. Select Close. 
  8. Congratulations, Google Drive will now be an option to scan documents to at the Follow-Me Printer. 
  9. Return to the next step for scanning. Return to scanning
Print Article